Questions & Answers for: egr valve dodge stratus

miles per When going down the highway and i reach 50 miles per hour the car starts to act like it is missing and coughs then continues. Does you stratus idle rouhgfuly, have you checked your EGR valve

Ad

Question about 2001 Stratus

2 Answers

...circuit is shorted to voltage EGR solenoid has failed PCM has failed Please let me know if this information is helpful. Positive feedback is appreciated. Thank You! Might be the egr valve

Ad

...egr valve i have the same problem. autozone told me it was due to a bad egr. car runs fine though. what should i do? Replace the egr valve and solenoid if it is the mitsubishi motor, if it is the ...

po401 egr flow insufficient on Dodge Stratus 2000 It could be a hose leak or blockage, or the EGR valve itself or the EGR solenoid or at worst the ECM.

...the egr located on a 2005 dodge stratus? hemi engine? EGR valves are usually on top of the intake but with the Hemi plastic cover you cannot see much. It will have a single vacuum line running to

Question about 2001 Stratus

1 Answer

...get from the dealer?. EGR Valves rarely go bad. the EGR solenoid is common though, you can get it aftermarket, thats ok. The valve bolts on, 2 bolts, the solenoid just has hoses and a small elec

egr valve loated on my stratus 2001 3... Where is the egr valve loated on my stratus 2001 3.0L should be on the intake manifold should be a dish looking shaped part... go online and pul;l a pic of one

...EGR valve, the EGR valve is between the intake and the exhaust, EGR stands for Exhaust Gas Recirulator valve. It must be able to flow properly in order to pass emissions anyway if they do a smog

Question about 2002 Stratus

1 Answer

EGR Valve or not? Hi, I have a 2002 Dodge Stratus SE. It is a V6 2.7L how do I know if I have a EGR Valve or not? How can I check? You have an EGR valve. For a specific location I recommend the Haynes

Question about 2002 Stratus

1 Answer

EGR valve and solenoid on 2002 dodge stratus rt and still getting P0401 code. What else can problem be? causes include --hose leakage / blockage, basic setting not carried out ( if applicable)--wiring

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...