...Edge With the stitch selector set on "D", a narrow edge can become a rolled edge. Remove the left needle and the corresponding thread. Clear the stitch fingers. Turn the stitch length adjusting dial ...
...stitch goes over the folded edge each time to the right. This should pull in the folded edge a little giving a scalloped edge. Just do a couple of trials to work out the best position for the folded ...
...stitch just onto the folded edge.I have only ever done it on knit fabric, as it does show and not very successful on a curved hem edge, straight edge is fine. You only want to catch a minimal ...
Question about 1034D Mechanical Sewing Machine
...can test your stitches on some scrap fabric and see what looks best.
An Over-edge stitch is just that, just a stitch over the fabric edge. It probably would not be suitable for sewing a
edge zig zag stitch bunching underneath When zig zagging over a raw edge, the tension on the thread will pull in the fabric, especially in lightweight cottons or even lighter organza. Its not the best
edge stitches bunch Use a different stitch, use the triple zig zag or serpentine stitch so he needle is going through the fabric three or four times as it swings left to right.ma plain zigzag, because
...edge zig-zag stitch bunching Zigzagging on the raw edge of a lightweight fabric will pull up, because the needle is swinging to the right side off the fabric, bet solution is to use the three step ...
Question about 3210 Mechanical Sewing Machine
...edge, not the needle. You would also generally make your stitch a little longer than the standard 2 mm--around 2.5 mm to 3 mm. You can use standard thread, or there is top stitch thread available. ...
Question about 3210 Mechanical Sewing Machine
...that I can have neat seams and which would be the best seam information stitch Before making the cardigan you can knit plain stitch on each and every edge. Use a flat seam sewing stitch to stitch
Question about 3210 Mechanical Sewing Machine
...stitch length and width in "Sewing Information Menu" Both of these are shown on page 4:2 in the User's Guide which can also be downloaded for free from: ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions