Questions & Answers for: Jeep ect sensor

ECT sensor (engine coolant temperature sensor). Usally you can mesure the resistance and the voltage of the ECT sensor. You need a chart which says the Resistance versus the Temperature versus Voltage

ECT) sensor on the 2.5L and 4.0L engine is located on the thermostat housing. This is the thermostat housing....and the ECT is mounted on the side.... By where the smaller tube is. This is the sensor:

ECT) sensor at engine startup.  After more than 3 minutes of engine operation and less than 1 hour of engine operation, it will again monitor the ECT data.  DTC P01281 sets when the ECT data

ect sensor for jeep 2005 5.7 hemi got p0128 troubleshooting code The Engine Coolant Temperature (ECT) sensor on the 5.7L engine is located under the air conditioning compressor. It is installed into a

...ECT sensor. conn. and it reads (2 pins 2 meter leads) about 300 ohms. is this what you want. first google hit on sensor , but FSM shows truth.... 1st hit shows....... its a NTC thermistor with these ...

...sensor bad no it does not. not ever. it may run a test on the ECT and tell you it reads wrong, sure. but that ONLY means the test failed, a technician then tests it by hand , then the wires. no ecu ...

...sensor on a 1996 5.2 jeep grand cheeko limlt is this an ENGINE TOPIC? engine coolant? (no symptoms stated, engine or A./C systems?) some cars have 3 sensors. for this. engine, A/c and fans. so????? ...

...sensor on jeep cher 2001 4.0 engine. to what? there are many first post symptoms or job. why must be guess all that. engine running bad, scan DTC errors? what? some engines have up to 5 sensors. ...

...ECT Sensor Voltage Too High that is sae.org name ECT means the engine coolant temp. so where is it, ill answer for all gas engine 4.0L see that big rad hose going to front of head and that thermostat ...

...ect sensor located in my 2004 Jeep Liberty 4wd 6 cylinder 3.7 and am I going about this repair all wrong? Check engine light came on. Jeep is running great. Had local parts store run a diagnostic ...