Questions & Answers for: eco mode Watches

...eco drivewatch 1. set mode to CHR with the bezel fully in. 2. pull bezel out 2 notches. This will set all (or most) hands to 12. 3.press A (top button) repeatedly until you get MIN in the left window ...

Eco Drive Titanium I just bought one from macys. It didn't seem to be working and I told the saleswoman there. The pressed a button and the chronograph spun around so I assumed everything was fine and

...Eco-Drive Just pull the crown out, turn it so that the bottom analog display is set on "CAL" and push crown back in. Voila!! The watch will automatically set the time and date when it is in receive ...

ECO watches that I keep in an open watch box, next to a window, when I'm not wearing them. Two of them have lost their charge, even though they sit in the light all the time. What am I doing wrong and

Adjusting the mode hand of Citizen EcoDrive How can I adjust the mode hand to point to the correct mode? The mode hand does not point to the mode that the watch is actually in. It's off by two "modes.

...mode and nothing. i have a citizen eco-drive BL5260. I assume that you do not have any instructions for this watch. If you enter "www.citizen-signature.com/#/settings/" you should arrive at the page ...

How to turn the alarm on/off? mcdevito75 here, You should be able to press MODE until you see alarm on the display then simlpy press set for on/off of the alarm. Once set, press MODE again to return ...

how do you set the time 1-turn the crown til the mode hand points to "time" 2-pull out the crown 2 clicks to time correction 3- adjust to the correct time 4-push crown in

Eco Drive E820? If you do here are the simple steps that can help you. -Pull the crown out one notch -Rotate the crown to align the mode hand with time/calendar[TME] as indicated on the mode sub dial.

eco drive Hi, Here is a simple steps to set up the time: Pull the crown out one notch Turn the crown to align the mode hand at the time mode Time Pull the crown out another notch Turn the crown to set