module (ECM)/powertrain control module (PCM), and it monitors atmospheric pressure. The ECM/PCM estimates appropriate intake airflow from the manifold absolute pressure (MAP) sensor output voltage and
...to the Engine Control Module (ECM) to trigger the Engine Light or Service Engine Soon light. The ECM stores the P0700 code and it means the TCM detected a malfunction with the transmission
...Module (ECM) When is the code detected?A high voltage signal from the fuel tank pressure sensor is sent to Engine Control Module (ECM).P0450 - Evaporative Emission Control System Pressure Sensor ...
...module (ECM). Error Code: P0505 Fault: Idle Speed Control (ISC) System - Malfunction Possible Cause: -Wiring harness. -Idle speed control (ISC) actuator/Idle air control valve (IAC) valve. -Throttle ...
module (ECM) communicates with the TCM to monitor the automatic transmission for faults. If the TCM detects a fault in the automatic transmission and sets a transmission related fault code, the ECM is
Question about 2003 Accord 2.4 LX
...program is required ex if u have a four cyl and u installed a 6 cyl u need new ecm that wont match including the wiring and ecm that would have to be programed to match bcm body computer module ...
Question about 2003 Accord 2.4 LX
...module (ECM)--Kam error==causes --ECM it also refers to system voltage ---malfunction===causes ---wiring,-- poor connections-- battery---alternator before you race out to get an ECM unit have the ...
Question about 2003 Accord 2.4 LX
ECM= Engine control Module PCM=Power Train control Module. It is what the coil packs are usually siting on or near it. each manufacture is different on its location of mounting. sometimes it is called
...module (ECM)--KAM error ( KAM= keep alive memory)===causes faulty ECM also it refers to system voltage ---malfunction===causes --wiring --poor connections battery -- alternator to start , have the ...
Question about 2003 Accord 2.4 LX
96 Honda Accord keeps blowing the ECM Main Control Module? This keeps the fuel pump from running, Help! Short to ground possible . Is it the fuse for the ECM blowing or the ECM itself burning out ?
Usually answered in minutes!
2,998 Questions
2,681 Questions
1,631 Questions
1,636 Questions
1,570 Questions