...ECM/computer. Nissan had a problem with the ECM box and the foam inside the box. The glue, which Nissan used to attach the foam onto the box EATS up your computer internaly. The vapors from the glue ...
...ECM/computer. Nissan put a set of foams inside of the ECM box to prevent the ECM from movement, however the glue that they used to attach the foams was causing the ECM to fail. The vapors from the ...
...there was a TSB for the ECM . I know the ECM issue has cause some cars to stall while driving I also have 2003 nissan sentra se r speec v It losses power 2.5RPM if I switch to lower gear it its ...
...ECM on my 2002 nissan sentra gxe is located on the left side of the firewall if you're standing in front of the car. It's easy to get to and remove, just a few bolts and a harness. The problem is in ...
...the stops. acts like 2004 nissan sentra starts the stops. acts like its not getting fuel. I have replaced the max airflow sensor/fuel pump/crankshaft sensor and the ecm. check your ecm ...
...04 nissan sentra just use the cheap stuff and use an additve like lucas oil treatment.... great stuff I have an 04 NISSAN SENTRA SE R SPEC V 2.5L W/ MODS AND MY GAS DOOR SAYS PREMIUM FUEL ONLY SO I ...
looking timing diagram for a 1.8 nissan sentra 04 looking timing diagram for a 1.8 nissan sentra 04 Contact us at www.nissanpartsnow.com and we can e-mail an image to you. Thanks
ecm from an 04 model and it made it worse. my car would run with the old ecm and then randomly stall out at a stop or at times it would lose power, the car would stay on but it would not drive( no rpm
of the ECM box. The glue that nissan used is toxic and eats the ECM from the inside. That mey be causing your issues. have the VIN number checked to see if the campaign has been performed/foam removed
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
