Questions & Answers for: Buick Park Avenue ecm

check engine light 1991 Buick Park Avenue-replaced ECM then Crank Position Sensor. Solved starting problem but now check engine light is on. Is this just a reset due to these repairs or is there a ...

no power to the hot side. Check your fuel injection fuses. If the fuses all look good, replace the ECM. The ECM output drivers to the fuel injectors may no longer be working. I see this alot on these

where is the ecm on a 94 buick park avenue and what does it look like???? All 94 & 95 Buicks  ECM units are G.M. DELCO Part # 16183247.  There are NO-NEW Ones available, even from a

...works, my question is there a separate controller for the fuel injectors or do they come out of the ecm? also is this a common problem? what do you suggest.thanks NO THIS IS NOT A COMMON ...

If I change the ecm, does it need to be programmed? I'm purchasing a new one from a local parts store and have never done one. Late 95 into 96 is when the changed from an ecm that had a replaceable ...

where is the ecm computer and directions for replacing it I replaced my computer on a 95 Ultra. It is up under the dash behind the glove box next to the fire wall. There are three large connectors ...

Where is the ECU/ECM located on my 1993 Buick Park Avenue Ultra? Hello customizer03, It's under the dash on the right-hand side. See picture below. Hope this helps. Regards, netvan ECM is usually ...

...likely a computer issue. To test the TPS circuit, you need to check voltage and ground from the ECM - 5v is the normal reading between the ECM reference circuit and the ECM ground circuit at the ...

New ECM put in How do I make the new ECM learn the car. I got an ECM from autozone and supposedly they programmed it to my car. I gave them the VIN and the mileage. But I get no response when I try to

Where's the ECM on a 1994 Buick Park Avenue. How do you remove it? Under passenger side of dash down by the kick panel. Remove battery cables before disconnecting the ECM. Then remove the connectors ...