trim panel that faces the taillamp. Remove the 3 nuts from the studs that holds the lamp onto the body Remove the wiring connector Detach the clip at the top outer edge, and pull the lamp straight out
...easy as possible would be great. Thanks On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there ...
...when pulling the trim as it can snap easily. Do note where the clips behind it go and again, caution....those clips snap easily too. The job is pretty easy if you know where the clips are hidden, ...
...easy, all scan tools work here, and are borrowed for free, (the zone) or bought for $9 (ask) too high and too low are trouble shot different, so too high this can be stuck ISC or blockage under the ...
Usually answered in minutes!
521 Questions
461 Questions
347 Questions
364 Questions
313 Questions