Question about DC17 Animal Bagless Upright Cyclonic Vacuum
Dyson won't go back into upright position to engage suction My daughter was using our Dyson, switching the bottom right knob from bare floor to carpet repeatedly, without first turning off the vacuum ...
...Dyson. Check that the brush control dial is in the centre position when upright and then moves forward when the head is released. If the brush bar is still not spinning when switched on in the ...
Question about DC07 Bagless Upright Cyclonic Vacuum
...turns until the handle is placed into the upright position. What might be the problem? Hi its Darran at Dyson. The brush control is designed to switch the brush bar off automatically when you stand ...
...Dyson. Make sure that the brush control dial on the cleaner head is in the correct position for use on carpets. It should be in the centre position when in the upright mode and then when the head is ...
Question about DC17 Animal Bagless Upright Cyclonic Vacuum
...dyson does not work when in the upright position. When I pull the handle back, it will run, but the suction is not very good at all. I tried washing the filter, but that didn't work. Sometimes it ...
Question about StarView SV211K 2-port KVM Switch
my dyson dc29 does not turn on in upright position but will start up in not in upright position but there is no suction (google) dyson dc29 how to .
Question about DC17 Animal Bagless Upright Cyclonic Vacuum
Dyson DC 25 power shuts off in upright position To clarify, do you mean the suction and brush motion shut off in the upright position, or that the entire unit shuts off? If the latter, most Dyson ...
Question about DC14 Animal Bagless Upright Cyclonic Vacuum
...not turn on when Dyson is in an upright position I have looked for any blockages. The sweeper works. When the sweeper is upright it turns off. Therefore I cannot use the wand attachment try this ...
Question about DC14 Animal Bagless Upright Cyclonic Vacuum
Dyson DC40 will only turn on in the upright position, and is making a very sickly, groaning noise. Even in the upright position, it is not picking anything up. Clean all filters and make sure that the
...dyson D17, the issue is the power cuts out in the upright position. If reclined, the power will turn back on and the vacuum will work again until I put it in the upright position again. Both filters ...
Usually answered in minutes!
1,132 Questions
1,137 Questions
870 Questions
836 Questions