Question about DX-LCD19-09 19 in. LCD TV
...Dynex 42" LCD tv? The best solution i have found so far is to hit the mute button on the remote. It will display a small "MUTE" box in the lower left corner of the screen for a short while, but that ...
Question about 32 in. LCD Flat-Panel HDTV
dynex 42-inch tv the speakers don't close off. What should i do? Use the MUTE button on the remote to mute your TV speakers and then you can still use our headphones. You can continue to adjust volume
My Dynex webcam will not record sound. It use to but now it won't? What happen? Likely the volume got turned down or muted. Try right clicking on your speaker icon in your tray and see if the "mixer" ...
dynex 24" lcd led tv picture works but there is no sound on anything dvd vhs tv etc. Check to see if mute is on, and through the menu to see is sap is on. Sometimes button are accidentaly pressed
Question about Mono USB Headset with Noise-Canceling Microphone
dynex headset does not shut off sound from desktop when plugged in usb port Plug the USB connector into an available USB port. • Check your computer's volume level. • Check if your computer's volume ...
dynex 18u headset not transmitting sound My dynex 18u worked very well with magic jack. It stopped working. I am able to hear the person I am calling but he could not hear me at all. Make sure your ...
Question about Mono USB Headset with Noise-Canceling Microphone
Dynex Microphone I can't talk out of my headset for some reason, My friends can't hear me Plug the USB connector into another available USB port. • Check your computer's volume level.
Question about 32 in. LCD Flat-Panel HDTV
...dynex go mute I got no sound If not muted, check the speaker/s. If found OK; check and replace the damaged component/s at its audio output section circuit board. If needy, replace this board as card ...
Question about 32 in. LCD Flat-Panel HDTV
When I would trun on my dynex tv the mute would automatically come on. & I would have to turn the sound on by pressing the mute myself. How csn I trun this back on? Its not a fault, its factory stuff!
...Dynex TV. The "ok" button is also the mute button. When trying to change the input, and hit ok after selecting the input I want, it only mutes the TV. I've tried using a different code as all the ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions