Questions & Answers for: dyna glo problems

dyna glo ventless rmc50 ngt can this heater be changed from natural gas to propane use, a local heating shop told me it cant be done All gas heaters can be converted from one type of gas to another, ...

...Dyna Glo 40,000 BTU heater that won't maintain ignition. Once you let go of the start switch the heater shuts off the gas bottle. I am sure it is the thermal switch and am not sure how to verify that ...

...dyna-glo pro we have three dyna glo pro heaters { model # RMC-KFA170TDGP, we need filters for them, but can not find them. we do not have our manuals, and when we went to home depot, they no longer ...

Dyna glo kerosene heater Model RMC -55-R7 . It will not light entire ring around the wick. Just the front part also smells strongly. I have the same problem and I have checked the carbon on wick. It's

...Dyna-Glo vent-less wall mounted natural gas heater model number RMI-60NG Pilot light ignites.However no gas will supply too the burners.Causing them to be inoperable.What might be the cause of this ...

dyna glo tag along propane heater pilot stays on but when turning when I light heater the pilot will stay on and nice blue flame but as soon as I turn to low the flame goes out and also on high sounds

dyna-glo wall heater seems to have mixture problem pilot shuts off after every heat cycle pilot is three inch long yellow flame yellow flame ng and flame should just cover last third of thermocouple ...

...dyna-glo 20,000 btu ventless wall heater and the flames are burning way too high so much so it's blackened the white part above the grate what could be wrong possible regulator problem or incorrect ...

Dyna-Glo 30,000. Why doesn't it light and 'glo' when the flames burn but will continue with flames only? what is the problem with asking Dyna- glow dealer .

DYNA GLO CABINET PROPANE HEATER PROBLEMS I have a DYNA GLO CABINET PROPANE HEATER. It is only works on low any ideas why and what I can do? Turn off the gas, Disconnect the connector. Reconnect the ...