Questions & Answers for: BenQ FP dvi

...powers off immediately Hi Experts I have a 1 year old beng monitor 17g+ I have been using the DVI input worked great However , it just stopped and powered down. The computer is fine runs with ...

...caps would not power up, the other powers up but no picture whatsoever from vga, hadn't tested the dvi yet. I took the video input board from the non powering one and put it in the powering one. I ...

...links: http://www.buy.com/prod/benq-fp222wh-widescreen-22-lcd-monitor-5ms-700-1-1680x1050-hdmi-dvi/q/loc/101/203945371.html

Benq Fp737s Every 10 to 15 minutes Input select (D-Sub or DVI) appears on the screen, If you change it to DVI it will automatically default back to D-Sub.If you go to the monitor and click on the menu

"No signal detected" when LCD connected with DVI-D Cable My existing configuration: Monitor: Benq FP71E+ with VGA and DVI-D Port Graphic Card: Nvidia 7600GT with Dual DVI-I Ports DVI Cable: DVI-D 18+1

can you help I have just treat myself to sky hd my monitor has a dvi socket on the back so I got a hdmi to dvi connector the problem is the monitor displays a out of range message ! any ideas ? ...

...goes in sleep mode, it comes back streched again. What can I do? I changed the D-sub cable for a DVI one and the problem was instantly

no signal detected I trun monitor on it is lit then goes off and displays this message no signal detected Check all of your cables - VGA / DVI mainly in the back of the monitor and the back of the PC.

A blue display box continually pops up with Input Select D sub DVI. I am thinking it is something to do with the monitor. What is wrong? This monitor has two types of video inputs, a 15 pin VGA D-sub ...

...is always green (never orange). The display doesn't work either connected to PC with with D-sub or DVI-D. Is hw damaged? Go to CMOS setting on your computer motherboard and check energy saving ...