Questions & Answers for: dvd pcb Televison & Video

...DVD MECH. ALL VOLTAGES ARE IN. NO VOLTS GOING TO PC RF,IF UNIT PCB. NOR TO ON/OFF BOTTON. ONLY TO VOLTS INPUT TO PCB AND NO VOLTS OUTPUT TO RF, IF PCB CONTROL. Since I don't know what model it is, I ...

...DVD nor play. After I unplug it the power button blinks for aproximatly 2 seconds and then turns off. The model # is HTS3410D/37, and the serial # is KN020630146474 The Front PCB might be damaged. ...

...DVD PCB needs to be changed. Try to see if the lens cables has any bends or bend out leads and try replacing the cable to see it is the problem. If its not the case than definately the DVD PCB board ...

...pcb board (circuit board in the dvd drive) from your drive to the good or new one. Then reinstall everything. The motherboard and pcb board are keyed together so you can't just use the drive with out ...

...PCB? I buy and export some car DVD player to US market. My new client ask me whether the PCB inside player is lead free or not. My supplier explain to me in car industry, this is not required. It is ...

...DVD input assigned to IN1; TV receiving TV signal routed through same HDMI working OK. Was working OK once. Didn't change anything since. This model has a defective hdmi pcb assy. this is a well know ...

...dvd player was dropped and now the only thing that happens when turned on is the word loading. is there a quick fix to this or is it just need to be trashed???? Yes,it is trashed time.The thing ...

...DVD more chance bad drive PCB Check: avsystemparts.com If you would like to try to play DVD on your pc, you can download a dvd player program onto your computer such as Daum Pot Player, Leawo Blu-ray ...

...CD or DVD More chance Bad Drive or Problem with drive PCB. Open top Cover of drive, open tray, close tray. If laser flashed but doesn't play CD-DVD more chance bad drive PCB Check: ...

...DVD mechanism open the metal case top and bottom. Underneath the mechanism with the bottom cover removed you see a small PCB soldered to the loading motor pins. Remove the small PCB turn the PCB ...