dvd player Door will not open manually or with remote. Do replace the loading belt in the loader unit ,the belt is serrated (full of cracks) and is very dry .The belt slips when pulling . Symptom : my
in-op drive This drive will open, close and begin a process, but then I get a "Wrong Configuration " Code 19 Message. In the system info center, It reads ? -VxD loader in-op. In the Controll Center, I
...loader tray with my finger while pushing eject and it worked! It works again. Guess it got jammed. Probably by my 5 year old! I had the same problem with my Toshiba SD 4900. I read these posts, and ...
Question about SD-K220S DVD/CD Player w/Built-in Hi-Fi VCR :
...DVD loader in place. Step3Bend the two tabs outward that hold the loader in place. This is a delicate procedure because you don?t want to hurt the device. The tabs are relatively easy to break since ...
...DVD loader in place. Bend the two tabs outward that hold the loader in place. This is a delicate procedure because you don?t want to hurt the device. The tabs are relatively easy to break since ...
...dvd has a tape in it and after playing it we tried to open it up to take it out and it will not open up...have tried to shut it off and still no results will have to open case and turn the worm gear ...
DVD in my SD 3990SU - it won't play and the door won't open using the remote or the button on the front of the unit. is there an alternate way to manually open the cd loader. You will need to open the
Cannot insert a videotape into the VCR on my D-VR660KU. A tape I was rewinding got stuck and I had to force it out. the next time I tried to insert a tape, it went in all the way but would not lower ...
...Loader-------------------identifier {default}device unknown <===0xc000000e problem! path \Windows\system32\winload.exedescription Windows Server 2008 R2locale en-USinherit ...
Question about SD-P1900 Portable DVD Player
...loader mechanism loads the disc properly into place and if the catch up magnet catches the disc in place, and still the dis do not spins, replace the sled motor. OK. You can check on this: How to fix ...
Usually answered in minutes!
405 Questions
364 Questions
299 Questions
263 Questions
243 Questions