...dust on chips and contacts and repeatedly get error message saying each cartridge is not installed. plenty of toner in all cartridges. Any advice? This worked for me Each toner cartridge has a small ...
...dust accumulated on the glasses. Need further help please ask. Make sure the drum is working correctly. It could also be that the electrical current is not applied to the drum in the printing process ...
...the front you will see a small chrome /silver bar with a tiny little square, that is a sensor, dust it off, if code comes back try swapping drum and or sensor one for each drum see if code ...
Question about bizhub 350 Black and White Copier
...for wear also lift the lid and look at the mirrors on the scanner unit to see if there is and dust on them as this affects the copy quality if you are using for printing check the difference in ...
drum, other than removing the toner dust. If you have problems with print quality, firstly check each cartridge in turn and see if the rubber toner roller is smoothly covered in the appropriate colour
opc drum of my minolta ep 1080 is constantly having a band of tonner dust all the time. I would replace the drum cleaning blade. Good Luck
dialta 620 c004a PC DRUM COOLING FAN Failure. Open close front door to reset. If comes back Bad M-17 fan or fill with lots of dust/dirt
...drum looks like to little eye of a bug. Dust with a brush NO VACUUM static could destroy it. Re-install drum and re-install cartridge. When the last time a PM was done Developer replaced and Drum ...
Usually answered in minutes!
106 Questions
93 Questions
72 Questions
71 Questions
72 Questions