Questions & Answers for: Porter Cable dust

dust collector why would the sander stop collecting the dust? dust collectors usually work off the motor via a fan. Either the fan is broken or the bag is blocked up.If the bag is too dirty inside you

Porter Cable belt sander Porter Cable, model 362 belt sander won't pick up dust. Can I take apart? Does sander gum up when sanding old polyurethane? Do I need service manual? Thanks try to rig the ...

...is burning up. any recourse? Motor may just need new brushes, Cooling vents may be clogged with dust. or bearings in the motor or front roller maybe bad. Causing excessive drag blow it all out ...

...then just stopped running and now it wont turn on. Does not smell like it burnt up there was some dust in the moter, but i think thats going to happen. I had the same problem with mine. The problem ...

I have a porter cable belt sander that shoots dust out the front. It has a dust bag but the wood dust doesn't go in the bag. it used to. I have taped up some weak parts of the bag but I am not sure ...

...it is stuck and then gets going for a short while Hi, Sanders are prone to getting lots and lots of dust inside the unit. The cooling fan makes this problem inevitable. The only way to fix this is to ...

...has clogged up and I cannot get it unclogged. I've tried to disassemble it to get at the sanding dust channels but have had no luck at separating the two halves of the body, despite having removed ...

Belt sander does not collect dust anymore. I blew it out very well with my air nozzel and it did not help. It could have a piece of sanding belt in the passageway. What I have done is get a shop vac ...

if any, must be sealed. It is also recommended to use some kind of eye protection gear, gloves and dust mask

...they rip open way before they are half full Need some more information, are you vacuuming dry wall dust or wet dust or saw dust ? The reason I ask is sometime their are "upgrades" available for the ...