Questions & Answers for: Canon dust

Spots on Rebel XT image I was checking if there is any dust on a brand new Canon Digital Rebel XT. What I found is a number of circular "spots", that appear always in the same position (took different

Dust in lens I seem to have some dust just underneath the front lens element on my 18-55mm EF-S. Is there a (safe) way to remove this to get the dust out? Not by a user This seems to be a faulty item ...

Dust on Canon 350D I own a Canon 350D and there is dust trapped somewhere. Having cleaned the camera several times I am unalbe to find this dust. It is not on the lenses. I am wondering if I am using ...

...time I began scanning photos on my (still new) MP830, there have always been white spots (obviously dust) all over the scanned photos. I've repeatedly dusted both the platen & the photos, & I've ...

Canon MX850 dust under ADF glass To the two previous posters. I have exact same issue. Flat scans are beautiful, but scans via the ADF have started getting lines. Obviously, this is a dust particle. ...

Internal dust speck on Canon A720is in same upper right corner I am not sure how to clean the internal sensor of a Canon Powershot A720IS. The speck most likely entered the camera or lens when ...

...wont close it says "lenserror, restart camera"..what to do? It seems that there is some spec of dust thats lodged between the lens housing and the camera body. If you use your vacuum cleaner to ...

dust behind lens If the dust is inside the lens, then you are unlucky. Canon lenses (except for a select number of the L series lenses) are not dust or weather sealed. So each time you work the zoom ...

...1. unscrew the machine from the back panel removing all the plastic casing. 2. Get a blower and a dusting brush and clean all the dust particles and tonner that has fallen on the circuit board. 3. ...

...in canon ir 1610 how can I clear it. My machine was working I just desided to blow it, it was too dust. That's when the error started. Please help When you were blowing dust you would have forced a ...