Questions & Answers for: dryers transit bolts

Ad

Question about Ultima WD72 Front Load Washer/Dryer

2 Answers

...transit bolts not removed. also can be caused by motor not winding up gradually into spin - usually a motor tach fault. most likely cause is transit bolts inbalnced load will cause it to shake also ...

Ad

Question about Ultima WD72 Front Load Washer/Dryer

2 Answers

transit bolts for move and forget to remove them? is machine sitting square on all four legs? is it sitting on a suspended floor? if joist spacing is wide, then this can result in vibration. also your

Ad

...bolts have to be removed..called them but they will only send the manual or make an apt for a month away for someone to come..HELP...thanks TURN THE MACHINE OFF NOW. If the machine still has the ...

Question about WBVH6240F Front Load Washer

3 Answers

...transit brackets still on machine ..REMOVE THEM;; eat it For the new machine that is violently shaking, make sure the shipping bolts in back are removed and their plastic pins. For a machine that has ...

Question about Aquarius WD63 Front Load Washer/Dryer

1 Answer

...transit bolts have been removed and the machine is on an even surface. What now? FIRST OF ALL THE PERSON WHO INSTALLED THE MACHINE SHOULD HAVE REMOVED THE TRANSIT BOLTS YOU MAY BE LUCKY THAT ONE OF ...

Question about Aquarius WD640 Front Load Washer/Dryer

1 Answer

...could there be something more sinnister going on. Thanks. half loads will vibrate more than full load check transit bolts are removed if vibration persists, then fault is probably shock absorbers ...

Question about Aquarius WD640 Front Load Washer/Dryer

1 Answer

drum will not turn just bought it is there a transit bolt drum will not turn where is the transit screws check to see if the belt is off as dryers don't have transit screws

Question about WD61392GB Front Load Washer / Dryer

1 Answer

...transit bolts ,which are 3 of them to the back of the machine they are refitted by means of a 8 or 10 mm socket or spanner.....Failing that if you do not have them damage can be prevented by ...

Question about WD61392GB Front Load Washer / Dryer

1 Answer

...transit bolts and where are they -Are you talking about screws...? If so. Yes. It's on the back panel cover. -Transit bolts are the bolts that hole the unit on a box crate only. -After the unit has ...

Question about DLEX7177WM SteamDryer Front Load Electric Dryer, White, 7.3 cu. ft. Ultra Capacity with NeveRust Stainless Steel Drum, 5 Temperature Levels, 5 Drying Levels, 9 Programs, TrueSteam Generator Produces Real Steam, SteamFresh CycReduces Wrinkles and Odor

1 Answer

...bolts are meant for the shipping process to prevent the drum from moving while in transit. Most manufacturers use between 2-4. Check your product manual for details on the removal of the carriage ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Brad Brown

Level 3 Expert

18139 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...