...dryer then worked. Today I pushed the start button, and it would not stay running. It runs as long as the button is being pressed. (Not a good thing, if you have other things to do and cannot stand ...
Question about Elite HE4 Electric Dryer
...dryer runs, but now when you let go of the button it will not stay running. Very odd. Any suggestions?? Thanks, Van there is a holding contact at the motor wiring, check the schematics and trace that ...
...stay on when we press the start button it turns on for a moment. if we jiggle the start button sometimes it stays on. More offten than not it goes off after a fews seconds. every once in awhile it ...
Power working but won't stay on Power button turns dryer on as I press it but as soon as I stop pressing, it will turn off. sounds like u have a faulty start button. the switch isn't staying closed...
Question about Elite Oasis 6808 Electric Dryer
dryer won't stay on. I press the start button and it won't work unless I keep the button depressed manually My Kenmore elite dryer won't stay on. I press the start button and it will only work when I ...
...Dryer, start button doesn't stay on when I press and hold the start button it tumbles but not sure if it heats up. When I let go of button machine stops when I press and hold the start button it ...
whirlpool ultimate care ii dryer will not stay on when start is pressed if you push the start button an as soon as you let go of the start button your dry stop you need a new motor
...dryer, start button doesnt stay when it is pressed. It keeps coming off once the hand is removed from the start button. Is it a start button problem or thermostat problem? It is the door switch that ...
Question about LER4634J Electric Dryer
Dryer will not stay on after letting go of the start button. Dryer will stay on if start button is continuously pressed. I would suspect the door switch has failed .
Question about LER4634J Electric Dryer
...stay on. The dryer light is on, and as mentioned, does start while button is pressed, so it is receiving power. Any ideas fixya folks? It is most likely a blown thermal fuse located on the blower ...
Usually answered in minutes!
1,743 Questions
1,329 Questions
1,410 Questions
1,123 Questions
940 Questions