Questions & Answers for: Brother MFC drum reset

reset drum - brother mfc-8860dn how can I reset a drum of printer brother model mfc-8860dn Open front cover Remove drum unit and toner cartridge assembly Put drum unit and toner cartridge assembly ...

...reset the drum unit? Thanks for your help! Edward Front cover must be open Press The "Clear" key on the top panel Press 1 to reset the drum count Close the over To reset the drum counter, follow the ...

...drum. To reset the drum counter, follow the instructions listed below. Open the front cover. Press the Options key on the control panel. The display will show "REPLACE DRUM - 1.YES 2.NO". Press 1 to ...

Reset the drum counter on Brother MFC-9840CDW The drum unit was replaced because of immovable marks on one of the drums, not because it had exhausted its lifespan. I followed the instructions (Menu, 8

...reset drum count but when I press options, no display comes up to reset. Just beeps loudly at me. You have to open the front door and then press options, should see Replace Drum? just answer yes. The ...

...reset the drum counter? When you replace the drum unit with a new one, you need to reset the drum unit counter by completing the following steps: Turn the the machine?s power switch back on. Press ...

...drum. To reset the drum unit counter, follow the instructions below: Press Menu on the Control Panel. Press the Up or Down Arrow key to select Machine Info.. Press OK. Press the Up or Down Arrow key ...

...reset the drum unit count. To do so: Press the Menu button, and then enter the number 84 to access the Reset Menu. Press the scroll keys until Drum is displayed and press OK.   Drum unit will ...

...drum. To reset the drum unit counter, follow the instructions below: Press Menu on the Control Panel. Press the Up or Down Arrow key to select Machine Info.. Press OK. Press the Up or Down Arrow key ...

...reset the drum counter as instructed below. 5.Make sure that the machine is turned on. For MFC users: To confirm you are installing a new drum, press 1. For DCP users To confirm you are installing a ...