...Kit Missing," replace the Drum Maintenance Pivot Plate and install a new Maintenance Kit. While the Replace Maintenance Kit message is displayed, remove the Maintenance Kit. If the displayed message ...
...Kit Missing," replace the Drum Maintenance Pivot Plate and install a new Maintenance Kit. While the Replace Maintenance Kit message is displayed, remove the Maintenance Kit. If the displayed message ...
...drum is not cleaning is the maintenance kit. It was not stored on end was it ? If so the lubricant would have run to one end and not clean correctly. The transfix roller could be failing, although ...
kit applies a thin layer of oil to the image drum. When the image is applied to the drum the oi prevents the image from sticking. The cleaning blade cleans the drum after the image is applied to paper
Drum Maintenance Kit ■ Preheater ■ Electronics Module ■ Drum Assembly Check for and remove any media, jammed paper, or debris found in the exit path. Did this correct the
Question about WorkCentre 4150 All-In-One Laser Printer
...Kit Drum Cartridge. Labels are dropping a line off, could this be related? yup it is...you can reset the drum by pressing machine status button button then supplies and click on smart kit drum and ...
...Drum Maintenance kit can get dirty, and not clean the Drum properly, which can lead to jams. Also, the drive cam for the Drum Maintenance kit can fail. This means not enough cleaning pressure is ...
Question about Phaser 8400 Laser Printer
...drum. You either need to replace your maintenance kit , or my better guess is your using generic ink sticks and you need to use the sticks xerox makes for the machine. The problem is that your not ...
...kit on to the drum unevenly. You will hear a ripping sound as the paper exits the printer, this is due to it literally ripping the ink off the drum. Being an 8400, if your pivot plate (the assembly ...
Question about Phaser 8400 Laser Printer
...Drum catridge smart kit is fault I have Xerox work center 5225 photocopier yesterday its waste toner recycle spiral rod was broken & i replaced with a new one after installing the drum catridge, i ...
Usually answered in minutes!
534 Questions
436 Questions
284 Questions
267 Questions
262 Questions