Questions & Answers for: drum fuse Dryers

Question about magicolor 2400 Laser Printer

2 Answers

...drum. Bought a fuse to replace on the drum (suppose to reset it) and I still have an error. Has anyone had this problem and can it be reset (opc drum counter)? Thanks in advance for any reply ...

Ad

Question about C5200n Laser Printer

1 Answer

Thanks very much! There are fuses in drums that needs to be replaced in order to keep working with these drums. It's 1/16A fuses and NO MORE!!! Drum disassembly required to find a place where fuse is

Ad

Question about C5200n Laser Printer

1 Answer

...fuse PCB J70-3 to the ITB drum motor. Also, check whether 24V is output from the fuse PCB J71-1 to the microswitch PCB and also whether 24V is supplied to the fuse PCB J71-2 from the microswitch PCB. ...

Question about C3400n Laser Printer

4 Answers

...drum slot. Make sure fuse legs are making a good connection to the wires and aren't touching the frame. switch on printer and allow it to detect the absence of the drum. Switch off printer and ...

Question about MFX-1430 Copier

1 Answer

drum. There is a small fuse at the rear of the drum on the top( you will see the 2 brass contacts) When a new drum is installed, the fuse blows and resets the drum counter. Installing a used drum will

replaced it TOO SOON. You will have to find someone to replace the mini-fuse in the drum cartridge...it will still be ok...but soon you will not be able to print on the machine,,,READ THE USERS MANUAL

Question about C5500n Printer

1 Answer

...drum life warning still on. When replacing drums you have to have the printer off first, so the drums will reset. The best way to do this is to contact Rich @ www.summitechnologies.com; ...

Question about C5500n Printer

1 Answer

...drum there is a small fuse!You can either take it out and buy the same type of fuse or take a THIN piece of wire and bridge the fuse out,as soon as you put it back the drum warning will go away! Hope ...

Question about CopyCentre C20 Black and White Copier

1 Answer

...fuse on the top rear of the drum . Replace that fuse. Radio Shack will have them. Once the fuse is replaced, put the drum back in, It will see a new fuse, blow it and reset the counter. Really

Question about Magicolor 2530 DL Laser Printer

1 Answer

...the drum Pull drum out, look at bottom back for a small fuse. You can get the fuses at Radio Shack for a couple of bucks. Replace fuse. Print till pictures come out all messed up then replace

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...