Questions & Answers for: Kyocera drum is defective

...defective drum EEPROM drum needs to be replaced or defective engine PCB the above suggestions assume that it is an original Kyocera drum hope it helps hi, open the door on the left site and take out ...

EEPROM does not communicate nor mally. Defective connection drum PWB(YC1) and Connect-L PWB(YC3). Maybe defective drum PWB EEPROM or defective engine PWB or itis just the drum unit itself is defective

...Defective drum surface potential. soluitons If a drum unit which is known to work normally is available for check, replace the current drum unit in the printer with the normal one. If the symptom ...

...Defective drum motor drive transmission system. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness. Check if the gears rotate ...

...Defective drum PWB EEPROM. - Defective engine PWB. Check procedures/corrective measures: - Install the drum unit - Check the connection of connectors drum PWB (YC1) and connect-L PWB (YC3). - Replace ...

...Defective drum PWB EEPROM. - Defective engine PWB. Check procedures/corrective measures: - Install the drum unit - Check the connection of connectors drum PWB (YC1) and connect-L PWB (YC3). - Replace ...

C7760 in kyocera KM 1635 C7760 Description Drum type mismatch problem B The drum type is undefined. Causes Defective software of the engine PWB. Defective engine PWB.

...drum PWB (YC1) and connect-L PWB (YC3). (See page P.1-4-9, refer to figure 1-4-5) Defective drum PWB EEPROM. Replace the drum unit (See page P.1-5-10). Defective engine PWB. Replace the engine ...

error code C7760 in Kyocera km 1635 copier help me Drum type mismatch problem B The drum type is undefined. Causes Defective software of the engine PWB. Defective engine Change the drum unit

...C7900 for KYOCERA TASKALFA GX 2200? Drum EEPROM error Reading from or writing to EEPROM cannot be performed. Causes Poor contact in the connector terminals. Defective drum unit. CHANGE THE DRUM ...