Questions & Answers for: drum cracked Video Game Consoles & Games

...drum. It had cracked, and when the drum spun around, it was spinning unevenly, causing the banging noises. Luckily my husband bought the extended warranty, and Maytag wound up replacing the entire ...

CRACK IN DRUM MAYTAG NEPTUNE FRONT LOADING GAS DRYER unless this is less than a year old your dont have much chance of a free repair. drums dont normally crack but it can happen around a seam. did it ...

...Electric Dryer, dosen't seem to collect any lint in lint screen and now makes a thumping noise when drum is rotating. Dosen't seemed to dry well either? The thumping noise is a stress crack from poor ...

...drum in my dryer cracked in the very back where it is supported by the rollers. Each time the crack goes over the roller it would "thump". It was easiest to find by turning the empty drum by hand and ...

drum has cracked twice in four months you need to find out if there's something else with the dryer that's making the drum crack. You also need to think if you're doing something like putting shoes in

Dryer makes a clunking noise while drying. Is it possible that the drum is "Out of balance"? Most likely if it is a thump thump noise a drum roller has a flat spot and is causing the noise. The dryer ...

...cracked drum. What is best way to check and how to determine problem. replace rollers on drum My bet is that you have a failed drum. Many are experiencing weld failures of LG and Samsung dryer drums. ...

...sound with or without anything in it Look for a crack in the seam, where the stainless steel drum is welded together, either at the front or back edge of the drum. If weld is cracked, replace

...cracked drum (the actual area that the clothes sit in) It is usually a broken weld or simply a cracked drum. You will need to peek inside the dryer with a flashlight and look for a crack in the drum ...

...cracked drum and will definitely need replacing. However the biggest problem I'm having is that all the lights turn on the panel and the motor sounds like it wants to turn on, but the drum does not ...