Questions & Answers for: Sharp AL drum assy

Question about AL-1551 Laser Printer

2 Answers

sharp al-1551 My drum light is solid red and my misfeed light is blinking red at the same time. i replaced the drum and checked for a misfeed but still have the problem. Did you replace the drum with ...

Ad

Question about AL-1530CS All-In-One Laser Printer

2 Answers

Drum replacement We have replaced the drum cartridge but the light continues to blink & it won't let us print. Looked everywhere for a solution. Thanks! [email protected] simulation 24 7 will clear the

Ad

Question about AL-1530CS All-In-One Laser Printer

1 Answer

new drum wont work Old drum was working fine, but drum light was blinking. Put in new drum but drum light was still blinking, copied 50 copies and drum light went full on which stopped all coping. Put

Sharp AL-1340 has black spot repeating 3 times on each copy. Have just installed new drum and there is a black spot that repeats itself on every copy made. Is this a problem with the drum's surface ...

Question about AL-1540CS All-In-One Laser Printer

2 Answers

makes a grinding noise near the drum. Copier works, but makes a "gear-grinding" noise near the drum area. Can't tell what's doing it. Un load the drum unit, check the drum/s gear, is it wear off, if ...

Question about AL-1655CS Laser Printer

2 Answers

My Sharp AL-1655CS copier has new drum and toner. Leaves blank banding lines verticaly down the page in at least three areas. This is a good one you may need to get it serviced. The toner is held to ...

Question about AL-1540CS All-In-One Laser Printer

1 Answer

my printer drum light is lit and will not copy. I have put in a new drum and the is still lit and will not copy Hi Please follow the bellow instruction? Open the front panel. Remove the toner and the ...

Question about AL-1250 Laser Printer

3 Answers

Page that prints has shadows of characters from last page printed. How do I fix it. replace drum unit This is caused by 1 of 2 problems. Most likely is the drum unit. I would try removing the toner ...

Question about AL-1641CS All-In-One Laser Printer

1 Answer

Sharp 1641cs - Dark/black page after replacing drum & toner The unit was on its 3rd to 4th toner cartrige when the drum replacement light came on and stopped copy/print. We replaced with OEM drum

Question about AL-1655CS Laser Printer

1 Answer

...is not on the drum it is located across from the drum as the paper goes between the drum and the primary transfer assy. and or roller (sponge looking roller), then reinstall the transfer

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...