Questions & Answers for: drive pulley Motorcycles

...Drive Belt Pulley, Routing?Accessory Drive Belt 3.0L (4V) ItemPart NumberDescription 1 3A674 Power Steering Pump 2 8501 Water Pump 3 19703 A/C Compressor 4 8620 Drive Belt 5 6312 Crankshaft Pulley 6 ...

pulley 3 8620 Drive belt 4 3A733 Power steering pump pulley 5 6312 Crankshaft pulley 6 8509 Water pump pulley 7 2E884 A/C clutch pulley 8 6B209 Drive belt tensioner pulley ----------------------------

drive pulley to the water pump. look for the accessory pulley to be out of position in the fore/aft direction or at an angle to the straightedge. Drive belt squeal is an intermittent noise that occurs

...drive pulley 28K543Drive belt 38A528Water pump pulley 48W508Drive belt tensioner Water Pump Drive Belt?3.0L (4V) without Tensioner ItemPart NumberDescription 16A359Camshaft drive pulley 28K543Drive ...

...pulley 4 8620 Drive belt 5 2E884 A/C clutch pulley 6 6B209 Drive belt tensioner pulley 7 6312 Crankshaft pulley 8 8509 Water pump pulley Component Locations 3.0L (4V) Item Part Number Description 1 ...

...drive pulley 28K543Drive belt 38A528Coolant pump pulley 48W508Drive belt tensioner pulley Water Pump Drive Belt - 3.0L (4V) without Tensioner ItemPart NumberDescription 16A359Camshaft drive pulley ...

drive pulley 2 8K543 Drive belt 3 8509 Water pump pulley 4 8W508 Drive belt tensioner pulley Changing to a shorter belt will not work to eliminate the A/C, the belt still engages the A/C pulley, which

...pulley 2 8620 Drive belt 3 2E884 A/C clutch pulley 4 6316 Crankshaft pulley 5 6B209 Drive belt tensioner 6 10344 Generator pulley 2.0L Zetec 4 cyl with A/C Item Part Number Description 1 10344 ...

pulley 98620Drive belt NOTE: Drive belts (8620) with automatic drive belt tensioners (6B209) do not require adjustment. NOTE: When a new drive belt is installed or a drive belt is re-installed after a

Drive pulley. Check the drive pulley for wear, binds or damage to the pulley or pulley shaft. Make sure the pulley turns freely on the pulley shaft. 4. Motor drive belt - tray drive belt. Check the DC