...pulley to the yellow mark and pointed the rotor to the 1st spark plug the car started but I need to fine tune it. Where do you find the screw to adjust with the gun? with engine nice and warm,move ...
...Drive Belt Idler Pulley Adjustment Bolt (If equipped) (Part of 8678) 2 ? A/C Compressor Drive Belt Idler Pulley Tensioner Bolt (If equipped) (Part of 8678) 3 8678 A/C Compressor Drive Belt Idler ...
drive belt (8620) from the generator pulley (10344). Remove the generator locking bolt and washer. Remove the inner generator-to-bracket bolt and the two washers. Remove the outer generator-to-bracket
...drive belt pulley tensioner bolt. Loosen the A/C compressor drive belt idler pulley adjustment bolt. Installation CAUTION: Incorrect drive belt installation will cause drive belt failure. NOTE: ...
...drive belt idler pulley bolts and the A/C compressor drive belt idler pulley. Remove the upper radiator hose bracket bolt. Loosen the two upper radiator hose clamps and remove the radiator hose ...
brake light and battery lights are on in a 2006 nissan quest This just happened to us. While driving the Brake and Battery light went on. These signs do point to the alternator not charging. ...
...drive belt or belts are attempting to turn. If you have a bad bearing in one of the pulleys, you can get that loud sound like " a train". If you are really careful, a "mechanic's stethoscope" might ...
Usually answered in minutes!
436 Questions
322 Questions
285 Questions
217 Questions
205 Questions