Questions & Answers for: Dodge Grand Caravan drive belt replacement

...drive belt Alternator mounting bolts Alternator harness connectors Alternator To install: Install or connect the following: Alternator Alternator harness connectors Alternator mounting bolts. Tighten ...

drive thru water, the belt slips off i have a 1999 Dodge grand caravan, If i drive thru a puddle of water, the belt slips off, then I'm stuck, can you solve this? you need to check or probably replace

drive belt keeps coming off of the tensioner everytime it rains or snows. We have replaced the Tensioner and the belt and made sure the splash cover is on under the van. Please help!!!!! Something may

...drive belts. Remove the timing belt covers and the timing belt. Remove the water pump mounting bolts. Separate the water pump from the water inlet pipe and remove the water pump. Inspect the water ...

...drive belt follows across the pulleys and make sure you know it or write it down in a diagram. Loosen the drive belt tensioner by loosening its upper locking nut with a wrench, then slip the drive ...

...are available from Gates, Continental, and AC Delco at RockAuto at the link. ...

...drive belt adjustment-3.3L and 3.8L engines All of the belt driven accessories on the 3.3L and 3.8L engines are driven by a single serpentine belt. The belt tension is maintained by am automatic ...

...drive belt and disengage the belt from the pulley. Be careful that any spacers that are used in mounting are kept with their original bolts. This will make correct reinstallation much easier.While ...

...drive belt Fig. Fig. 3: Deep cracks in this belt will cause flex, building up heat that will eventually lead to belt failure Fig. Fig. 4: The cover of this belt is worn, exposing the critical ...

...drive belt for cracks. Ensure that the belt is running at the top of the pulley and not down in the groove. Lastly if there is no other obvious problems then change the drive belt The belt will ...