Questions & Answers for: drill grinding motor

grinding noise While I was using my 6 month old 18v makita drill it started to smoke very alot. It reaked. Now it makes a grinding noise when I run it. possible burnt out in the brush holder ...

...Drill with fully charged good battery grinds to a dead stop just seconds after squeezing trigger. Has been around lots of drywall dust. We.ve the same problem with those Chinese batteries and find ...

...drill makes grinding noise then comes to a complete stop seconds after squeezing trigger. You should try to charge the battery again. Or you can try to fix it or then its time to get a new battery. ...

grinding sound, but the drill works. starting with the variable speed the switch part # is 2607200457 and list for 47.58, the gearbox part # is 2606200930 and lists for 75.90 and lastly the motor part

...grinding. you can hold and stop the chuck, no power. Stopped working after using hammerdrill. Clutch stopped working a long time ago. Screws were stripped by the full force of the drill. The drill is ...

hilti te5 motor turning but not driving chuck While the drill is running grab the chuck and turn it by hand. If you here a grinding noise that tells you the rotor gear is stripped.

...drill? Thanks! The grinding you're hearing is the normal sound for the clutch. There's a ring with numbers on it the higer the setting the more torque it'll take for the clutch to slip. Many of the ...

...Drill Doctor unplugged, shake accumulated bit grinding dust from behind the Wheel Cover into a disposable container. Remove dust particles around the wheel with a small, dry brush. Dispose of the ...

...drill makes a grinding sound and the chuck seems as if it isn't connected to anything as the motor runs. Any suggestions as to what might be broken? Thanks kindly--Harry might just need new motor ...

...drill? It is making a grinding noise. Chucks DON'T make grinding noises!!!!! The grinding noise is probably coming from the REDUCTION GEARBOX which is located behind the chuck [the shaft upon which ...