Questions & Answers for: drill bit makita

...bit is still stuck fast. Any ideas?!? The drill is brand new. jacobs come out with this all metal keyless chuck(i think thats what you have) and if thats the case, there is no solution for this youll ...

i can't unscrew the bit? I have a makita drill and don't remember how to get it to unscew to change bits just above the operating button there should be a lever that pushes left to right.

drill bit is on right now and I simply want to change it to the phillips screwdriver bit. Thanks have you opened up the chuck to remove the drill ? If not then you need to by holding the chuck tightly

...drill bit out,seems like the chuck itself is bad,any ideas on how to remove the drill bit? Sometimes if you happen to have the right size bit, it will stick into the bolt that holds the chuck on if ...

...makita Low quality steel drill bits get stuck in the Makita because the hammer impact squashes the metal, forming a ridge that gets snagged on the anvil's steel ball bearing. Use only impact drill ...

...drill bit in it. It won't open back up. the chuck on my new makita drill is stuck with a drill bit in it. It won't open back up. This is caused by tightening the chuck using the drills ...

...bit snapped in my makita bhr200 chuck.on taking the drill apart,the chuck is on a gear rod,and wont allow me to push the chuck down the sds bit snapped inside the chuck,but i cant get the chuck to ...

makita hr1260 drill won't rotate. how can I fix it? I put bits in and the drill switches on but won't turn the drill bits. have an appliance centre check out the drill motor as it may be burnt out.

...all functions working fine drill bit will not lock in Here is the manual for your drill. Pictures show to install and remove the bit. ...

...drill bit stuck in chuck is there a diagram of the chuck available Here is a breakdown. https://www.ereplacementparts.com/makita-hr3000c-rotary-hammer-parts-c-97_380_507.html Here is the page of the ...