Questions & Answers for: dremel coupling

...Dremel 395 type 2 and need a nylon coupling from the motor to the spindle (internal splines at both ends of a plastic tube). Where can I buy one? I have a Dremel 395 type 3 with the same problem that ...

I need a coupling For Dremel cordless drill model 850 Call Dremel at 1-800-275-2052 and they can help with parts and schematicsHope this helps. Dave

The variable speed switch on my dremel 395, can I get rep. parts The contacts are all burnt. I can't get it to run on the high rpm side. The part number you need is 2610945681 variable speed switch. I

...dremel 395 works but the bit doesn't turn there is a coupling between the motor and the spindle that has probably cracked or stripped out. I suggest going to Dremel.com and getting an original ...

Dremel (in my case the flex coupling broke): Inside the tool is a flex coupling and spline driver. The flex coupling is # 2615294309 and the price is $ 1.25. This is the hollow plastic sleeve about 1"

...coupling from motor to dremel moto tool model 395 coupling from motor to chuck ruined where do I find the parts? The part that goes between the motor and the chuck is called the CLUTCH UNIT, REF ...

...dremel will not come off. Is there a trick to this?The coupling seems to stuck. Try some W-D40 and gentle hits on the coupling to liberate the chuck 3 pin holders.If you got this type of chuck: > ...

...part number is 2615294309, but I would recommend calling Dremel direct at 1-800-437-3635 to ensure this is the right one. They made a change on this coupling. Let me know if you need more

...Dremel. Inside the tool is a flex coupling and spline driver. The flex coupling is # 2615294309 and the price is about $ 1.25. This is the hollow plastic sleeve about 1" long with grooves on the ...

dremel 3000 stopped working while in use. What parts do I need to repair? There is a coupling between the drive motor and the chuck. You will need to take the tool apart to replace it. E-bay has these