Questions & Answers for: dream maker ez spa jet

i bought a home and my coleman spa 400 series has a problem, the jets 1 don't come on, jets 2 do. the water isn't heating up. was wondering what the problem could be Pump one is the pump that does all

...dream maker eclipse spa that came with our home.. the morot was replaced by the orig owners about 2 yrs ago. we used the spa last winter and everything worked fine.. now the tub turns on, filters and ...

...Dream Maker X-400 and it is less than 2 months old. The power is on but the tub is not heating now, its down to like 82 degrees and the pump is not working but it has power. It just stopped

I just replaced the motor and pump but now it won't heat up and the jets are not working. recirculation pump possible bad relay for jet pumps or motors

Jets will not turn off,all other controls work ok on eclipse 8203 series. Any help please? possible stuck relay

dream maker x-500 control panel is blank. after filling, the spa ran more than 24 hours until reaching 100F, then stopped as expected. All jets and lights worked. Several hours later the control panel

Dream Maker Spas leak This means one of your top jets is leaking. Firstly try Fix A Leak this will stop any leak up to an 1/8". If this does not help there will be more difficult work in store.Each ...

All controls work but the button to turn on jets. Jets will run if temp attire is turned up. Bad Jets button on the topside controller panel - need new panel

3 jets aren't working. Model 2-928w https://www.fixya.com/t26638542-3_jets_arent_working_model_.2_928w see comments

...jet to work does the water level need to be above the air jets. when ever you fill the spa always fill it where the filter goes on just put the hose inside and let it do its thing filling up. After ...