Questions & Answers for: drain pump keeps running progress

pump is getting electricity (something I've never done before) and if it is, I could eliminate the timer. I hear talk of some solenoid thing, and have seen a picture of it, but don't understand how to

pump is unplug the unit or open up the bottom behind the toe kick and suck out all the water and find the leak by running it with the cover off till you see it. good Luck! Same issue with mine... Tray

drain is clogged, 4) your pump is damaged or doesn't run at all. There are a lot of appliance forum Q&As that address these issues. If you checked each of the above problems and still have the problem

...drain mode when it is full of water it also leaks from the top left of the cabnet Ok you have a few problems. the unit's draining because non stop because it's flooded (F1 fault). If you pull the ...

...drain pump stays on. take the kickplate off and check for water in the base. if no water then make that little red bar to the left of the watervalve in the base go up and down a few times. you could ...

...in a bucket. Run the drain cycle of the dishwasher. If it comes gushing out, the drain hose is clogged. If it still won't drain, your will need some disassembly of the drain & pump. good luck, Al ...

...Thanks for reading this! IF IT ENDS UP WITH WATER SHOWING AT THE END OF EVERY WASH THEN THE DRAIN PUMP IS JAMMED OR FAILED THE DISHWASHER PROG WILL JUST KEEP LOOPING BACK TRYING TO DRAIN THE

pump out suds and suds and water can leak out from under the door and do this,do you have this style i don't know just a guess,you can get the model number and go to utube or google it and you'll find