drain plug of some description. It may be a draincock, or just a plug. In either case, simply open or remove it to safely drain your heater. In a pinch, you could also disconnect the water connections
plug instead of a drain **** and you can remove the brass plug. Or the best way i think is to unhook both unions for the inlet and outlet on the heater, use a shop vac on blow, and blow the water out.
Question about Laars Lite 2 Pool Heater 325,000 Btu / Natural Gas
...drain valve/plug under the inlet/outlet header. Opening that should allow it to drain thoroughly. Depending on where you live, this should be done in conjunction with the rest of your pool ...
...drain plug if anything. Other than the drain you'll need to remove the pressure switch from its feeder tube and leave it hanging by its wires for the winter. Be sure the heater is level or tilted ...
Question about H Series Millivolt 250,000 Btu Pool Heater H2501
my hayward pool heater is leaking through the drain plug use Teflon tape or use a oring
pool heater my hayward h series pool heater is leaking thruogh the drain plug. Tried turning, tighten, remove and replace, still leaks alot. use Teflon tape or add a oring
H400 drain plug leaking The drain is leaking,does it have an o-ring use Teflon tape if no oring
Question about 250kbtu Ng Pool Heater - Inground
...drain plug on Hayward H series heater ? i want to drain the heater for the freezing weather - where is the drain plug located for the Hayward H series pool heater. There should be two. Remove the ...
Question about H Series Electronic Ignition 250,000 Btu Pool Heater H250ped2
how do I drain an h250fdn heater There is a drain plug on the inlet/outlet header.
Question about Mastertemp Heater
...that there is a leak (dripping) from the "drain plug" what is wrong and how do i fix it ? some of these plugs leak from bran new about he oly thing is make sure it is clean and use red silicone on ...
Usually answered in minutes!
3,171 Questions
1,894 Questions
1,239 Questions
1,098 Questions
927 Questions