Questions & Answers for: dough hook stuck

...Dough Hook on A200. I bought an old Hobart commercial mixer. Its in great condition. The only problem is there was no instruction book nor parts book with it. The p roblem is the dough hook Is in the ...

...dough hook still spins, so it cant be the motor. The other problem I have is that the dough hook is stuck on the machine, I have tried hitting the stem and under the hook with a mallet, dropping in ...

...hook is worn or the beater shaft pin is worn or dough has built up around the pin/shaft and is stuck.I'm a hobart tech and if i came to your place,first i would use a rubber mallet and hit the outer ...

Dough hook stuck in machine I have a Kenwood mixer KMC510 and am now on my 2nd machine because the dough hook became stuck in the first one and the unit was replaced. Now after only a few uses the ...

dough hook is stuck in the beater shaft of kitchenaid mixer The dough hook is stuck in the beater shaft of my kitchenaid mixer. I can't get it out. It sounds like it got overloaded when you last mixed

dough hook stuck immediately after use I just got my dough hook unstuck! The problem was the bolt at the top of the dough hook. This bolt is used to adjust the height of the dough hook. This bolt came

cannot get dough hook out of slot pin seems stuck run under hot water over where the dough hook attatches to shaft. this should free it.

...Dough Hook 1. Turn speed control to OFF. 2. Unplug stand mixer or disconnect power. 3. Tilt motor head back. 4. Slip beater onto beater shaft and press upward as far as possible. 5. Turn beater to ...

...dough hook is stuck in my K mix kmx50. Please note, this is not the 'normal' problem with the tool becoming jammed because there is not enough clearance to push upwards (I've done that before and I ...

...dough hook attachment is stuck in the mixer and would not come out Try filling the bowl with hot soapy water and letting it soak over night. Sometimes debris can get stuck in the latching mechanism ...