...dough, I can't get the pastry blade to come off. It still rotates and operates but it seems to be stuck on the spindle. This is the kind of thing it would be very difficult to fix without being there ...
...dough blade I can not remove the dough blade in my cuiinart food processor. It is stuck! On the DLC 7 Pro cuisinart the blade was removed by removing the plastic bottom. Make sure the unit is ...
blade got stuck to the processor after i knead some dough.It still works fine,but i cannot take out the blade.The blade turns around there,but doesn't come out.I knead most of the time and this hasn't
blade got stuck to the processor after i knead some dough.It still works fine,but i cannot take out the blade.The blade turns around there,but doesn't come out.I knead most of the time and this hasn't
...dough blade is seriously stuck inside the bowl after I made some dough. How do I get it out? Dough is normally water soluble. Try soaking it in water for a several days up to a week. Then try prying ...
...dough, but cannot get the blade attachment off the shaft. Do you have any suggestions as to how to get it off? Thank you Jennie Minda put the mixing bowl up as much as possible. spray some wd40 into ...
Question about Cuisine 5200 1522 Cups Food Processor
...dough in our Magimix Cuisine 5100. After we finished, we notice that the blade was stuck, and the plastic stalk holding the blade had twisted in such a way that the blade was jammed in the stalk. We ...
Question about Cuisine 5200 1522 Cups Food Processor
...dough blade. The feed tube is fully inserted, the lid is locked in place. What could be going on? If the unit works OK with other attachments and the problem is only with the one cup; then the blade ...
Question about Cuisine 5200 1522 Cups Food Processor
...do? hold it down My Magimix moved around. After I took the dough out, I found a date stone was stuck on one end of the blade. I think that was the reason for the machine moving around and being
...dough maker bowl, it is not coming out of the machine. The blade is stuck and I am not able to remove it or the bowl from the machine. Check that the safety lock pin is releasing from the base. It is ...
Usually answered in minutes!
89 Questions
72 Questions
69 Questions
104 Questions
47 Questions