dot matrix printer Dot matrix printer is printing dark and clear on the left side of the paper but the print is very light on the right side of the paper? Remove and reinstall the ribbon. Also, while ...
...dots on paper. Funny, I had the same thing. I took out the drum unit and removed the carrtridge, then slowly turned the drum, using the gear wheels at the end. Eventually I noticed a pale dot on thge ...
Question about DeskJet 1280 InkJet Printer
its stop printing and the LED power light green and orange at the center blink, like there is a paper jam. ts stop printing and the LED power light green and orange at the center blink, like there is ...
paper Dots, Lines and smudges on the printouts are due to deteriorating cartridges and cleaning the green drum of the cartridge may help temporarily. Take out the cartridge and gently clean the roller
...paper has the dots it would be caused by the toner or the image transfer belt. If no dots, the problem is probably the fuser. By any chance did you vacuum out the printer. The dots could be coming ...
...it feeds about 1/2 way into the printer, open the cover. Pull out the toner and look down at the paper. If it has the dots, replace the toner. If it doesn't have dots, the fuser is probably
...DOTS ON LEFT SIDE OF PAPER. when the paper is printed there are black dots even spaced on the left hand side of the paper replace the drum unit, if the problem persists check ...
...dots all over the paper, but I thought it was an indicaiton that I should change the cartridge. Think this is a roller problem, but not sure which one or how to eliminate the dots. Sounds like the ...
Question about LaserJet 5mp Printer
Stop Ejection of printing paper roll after printing in dot matrix printer How to stop rolling page after Printing done in dot matrix printer I assume you are printing on roll paper, but printer acts ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions