02 chev venture power sliding door After replacing the left sliding door and arrempting to adjust cable tension per information from GM, slidilng door will close, but not latch. it immediately goes ...
power slide door dosent close all the way power slideing door dosent close all the way CHECK THE PIVOT HINGE AT THE REAR OF THE DOOR, IF BAD IT WILL THROW THE DOOR OUT OF ALIGNMENT. THE STRIKER AT THE
My 01 chevy venture blend door acuator is not working. Is there a way to manually change it when the summer gets here? The ac worked just fine this last summer but I had no heat. The shop manually ...
adjust dr side door 2002 chevy venture driver dooor out of adjust If you can grab the end of the door and lift on,and there's movement, what you need is the door hings bushing, most all auto parts ...
I have a 2001 Chevy Venture and I just replaced the motor on the power sliding door with one from another 2001 Chevy Venture I have (don't ask). Anyway, the tension is adjusted... it opens and ...
...further adjustment with shims may be needed. I often use masking tape on the edges of fenders and doors to help prevent chipping
Usually answered in minutes!
776 Questions
608 Questions
549 Questions
460 Questions
342 Questions