Questions & Answers for: Canon door magnet

...door and looking through the camera 4. releasing or firing the camera and keeping pressure on the release button. If the magnet is working, the shutter will stay open as long as the release button is ...

magnet breaking. I had to tape the front door shut. Thank you. Error code for 0061-0001 Main cause : The laser shutter is faulty. The laser unit is faulty. The potential measurement PCB is faulty. The

...i can see in the shutter that is.... Take the lens off and charge the shutter. with the film door open hold the camera toward a light. Fire the shutter and if you see half light in the film ...

if you can, thanks! The door of the IR is held in possition with a magnet.You can just glue tye magnet back in it's housing and the magnet wiil hold the door inplace.Just remember to use a strong glue

...indefinite time, sometimes 20 secs sometimes 2 or 3 secs Will fast forward & Reverse Removed door cover & Have checked/inspected transport mechanism fairly thoroughly, very clean, no ...

...MAGNET ROLL IS OK. BUT COPY IS BLANK WHY? Hello, firstly I would check the laser station shutter. When the door is closed the laser shutter must be lifted up to realese the cover of laser unit, so ...

...door. A magnetic business card or similar may also work. You can also find these strips/rolls in the crafts section in most stores. Pretty much any magnet should work so long as its thin enough. I ...

magnet for the door broke off and now the magnet will not stay in, resulting in the door not closing - and LOTS OF TAPE FOR US TO TRY TO MAKE IT STAY CLOSED. this part is screwed into the structure of

...me.. Hi . You need to make this test . Try to print a report again. But this time open the front door in the middle of printing so the paper will stop between the drum and the fixing unit . The ...

...door Magnet Action Catch may not properly be holding the door closed. ++ if paper is stuck in unit 1 frame side connector you might get a E840. If no paper is found in the connector check the ...