...door interlock, DO NOT test by bypassing this can cause serious damage to the timer, replace if needed and work with safety unplug from power supply before removing any item taking note in detail of ...
the mains both are fine. I am sure that this must be something simple maybe a fuse in the machine or similar. Any help or advise greatly appreciated cheers Probably faulty door interlock. Replace same
...door interlock. in the door interlock, you will find the end of the door peg. force this towards the middle of the machine and with luck the door will open. anothetr method is to break the handle off ...
...3rd is a netural idea is door lock gets 240 volt live netural feed energises the lock which in turn switches feed over to other connection..look at interlock to get idea what wire goes
working wont fill up wont spin it bleeped a few times now wont go on a cycle The door catch (interlock switch) is the usual suspect for that fault. If it can't detect the door is shut it does not fill
Question about AW1400W Front Load Washer
Door interlock faulty, timer PCB, if you could give me some more details it would help. Have you any lights on?, will the machine do anything at all. That would tell us if it's getting power in or
e40 fault n error code E40 = Door open, door interlock, wiring or main PCB
2007 rang rover door would not open door would not open door interlock
door not opening cycle finished and door won't open prob door interlock
what does e40 mean E40 is door interlock error, it means that either the door interlock is stuck or faulty, or the wiring from door interlock to main control board are not connected
Usually answered in minutes!
181 Questions
75 Questions
55 Questions
30 Questions
25 Questions