Questions & Answers for: Ford Windstar door heater

...heater blend door problem, this is the door that diverts air either to the heater core or the AC evaporator to provide either hot, cold or a mixture of the two, it blends the air, if it fails you ...

...core. Check coolant level in radiator and overfolw bottle. Or, you have your temperature blend door stuck in the cold or partail cold position. Could be a bad blend door motor or heater cntrols

...heater controls is bad. The blend door motor is an electric motor. ------------------------------------------------ Air Flow Control Air flow control is accomplished in the following manner: Primary ...

...door is broken stuck.remove the dash console panel [ac heater panel and radio] you can see the door actuator.remove the 3 screws and pullout the actuator using flat screwdriver try to rotate the ...

...If the door is jammed, you may need to open the heater box to unjam. If it is free, replace the actuator. It looks like the actuator is right on the front of your heater box--see diagram

...3.0 come with a heater control valve or a blend door actuator I believe it has a blend door. I would check both in-line heater hoses, from the motor to the heater core, for a heater control

...replace the actuator. The part is $36 at autozone. If the door is jammed, you may have to remove the heater box to repair the door. That would be a big job... Let me know if you have any

...blend door under the dash.  The door is controlled by a small electric motor and directs air thru the heater core and the vents.  The blend door for the heater is directly behind the

...when I teted it. Please help and thank you in advance. So the blend door opens? Does the fan motor blow? Are both heater hoses hot? That would indicate the coolant is circulating through the

...door, which regulates the amount of air that flows through and/or around the heater core (18476) , where it is then mixed and distributed. Movement of the control knob from COOL (Blue) to WARM (Red) ...