Questions & Answers for: HP door closing

...door from closing, and it appears to be on the right side of the printer near the top where the cartridge engaging pins are, and you remove all the cartridges and transfer belt and the door closes ...

...door? By a door edge or on a hong extentionLook for a wire going to the the closing edge near thge latch or to a hinge- one of the hinged may have a curved arm going to a micro switch buried near ...

cover door for document feeder not closed when drunk I knocked the printer off the table. Now it says that the cover door for the document feeder is not closed. possible cause is that you have broken ...

I am getting a close the access door error message-door is closed The access door is closed, have turned off turned on opened closed and taken out the ink cartriges & reinstalled. Check the door in ...

closing the print cartridge access door (your model may vary) If you have attempted to completely close the access door and the error still appears, there may be a problem with the door sensor and the

After clearing paper jam, display light states back door not closed. It is closed, but I can't print After clearing paper jam, display light states back door cover not closed. It's closed. What do I ...

close print cartridge access door. It is closed Just setting up the new printer. Error message. close print cartridge access door. It is closed. I have also tried turning off, on. Also off and ...

The printer says that the door is ipne, and will not print but it is completly closed. In that case the sensor on the door is most likely faulty . Try to reset it by opening the door, close the ...

...door from closing completely and also locate the door sensor and inspect for damage to the sensor as well as the part of the door that disables the senor / interacts with the sensor when the door is ...

hp cp2025 error reads "front door open" when front door is closed After testing a cartridge, I slid the tray back in and closed the front cover. The printer would not print due to an error saying ...