Questions & Answers for: Proform doesn t turn on

...turn the machine on at all and at other times one or two of the many keypad functions will be responsive. I suspect there might be a fairly simple solution to this problem and would like to explore ...

...turn and then get on the machine and see if it slips. The user manual will tell you to pull it up a couple of inches to test the tightness, which is a relative method and doesn?t necessarily work. My ...

...INCLINE 1) Press the Stop and the Speed Up keys down while inserting the safety key. If this doesn?t work, click on the help topic entitled ?Alternate Calibration Codes? for key sequence ...

...turn it off, noticed a funny smell, and now it doesn't work at all. The display still comes on and says it is running at XYZ mph, but the belt is not moving at all. DEAR IF YOU DO NOT ANY MOVE ...

...doesn't Remove the screws or bolts securing the ends of the pedals to the crank axles. Slide the ends of the pedals off the axles. Remove any screws or bolts securing the left and right disc ...

doesn't come on. The incline works just fine. The motor will turn manu Hello i have a proform crosswalk sport treadmill and when i turn the speed on it shows a reading for a couple of seconds, but

...treadmill doesn't want to move when I turn it on. Do I need to replace it? please lube the deck belt+rollers bearing front and rear+test the drive belt motor and replace if necessary. God bless ...

...turn on. I've checked the power source and removed the motor hood. There is a red light on the circuit board that lights when turned on. I adjusted the reed switch, still, the display does not react. ...

...turn the belt for 1sec then doesn’t do anything. To try to start it again I have to turn the switch off and on It’s the lower control board or speed sensor. Not familiar with the model, but sounds ...