Questions & Answers for: dodge ram 1500 oil pan

Question about 1998 Ram 1500 4WD

1 Answer

...is located on a dodge ram pick up 3.8 1998 1500 v6 remove oil pan from engine..oil pump is bolted to rear main bearing cap of engine..pickup tube may be plugged if you're having an oil pressure ...

Ad

...dodge ram 1500 with 5.2 magnum no oil pressure, lifters are clacking, engine sludge Remove dipstick, exhaust pipe, left engine to transmission mount, loosen motor mounts & raise engine ...

Ad

dodge ram I need to know the location of the oil pump on a 1998 Dodge Ram 1500 truck and instructions on how to replace the oil pump. Remove the oil pan, it is mounted at the rear of the engine with a

Question about 2005 Ram 1500

1 Answer

...Dodge Ram 1500 Quad cab with a 4.7 liter motor, i have removed all oil pan bolts, and broke the seal on the pan, but it does not want to come off, almost as if something is connected from the inside, ...

How to remove the oil pan on a 2004 dodge ram hemi take motor mounts lose pull or jack up on motor block up and pull oil pan just a enough to get oil panl off

Question about 1998 Ram 1500 4WD

1 Answer

...dodge 1500 4x4 to change oil pan do i have to raise the engine Disconnect the negative cable from the battery. Remove engine oil dipstick. Raise vehicle. Drain engine oil. Remove exhaust Remove left ...

Question about 2001 Ram 1500 Truck 2WD

1 Answer

can I replace the oil pump in my dodge ram 1500 4.7 by removing the oil pan? yes, thats the only way you can do it.

Question about 1996 Ram 1500 Club Cab

1 Answer

dodge 1500 pick up The oil pump is located inside the oil pan, it is bolted to the center main bearing cap of the crankshaft. To replace it you must raise the engine off the mounts and then remove the

nothing outside the pan is in the way and there is a 1/4 in gap all around the pan seal. Something inside the middle of the pan is keeping it up. tap oil pan lightly with a rubber hub cap hammer

...Dodge Ram 1500, can the rod bearings be replaced via oil pan without pulling the motor Sure they can But you have to remove some parts to allow the motor to be jacked up far enough to get the pan ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...