...dodge intrepid I did this on a 2002 Intrepid, and found that it wasn't too complicated. I replaced the bushings only, rather than the tie rod end. You can get bushing replacement kits where the ...
...dodge Intrepid: inner tie rod Does anyone know what size socket is needed to remove the bolt and also what the torque is? Thanks, Troy To Steering Gear Bolt 90 Nm (66 ft. lbs.) Jam Nut 75 Nm (55 ft. ...
...intrepid-steering.html It worked perfectly. To add to it, I used a tie rod puller tool rented from Oreilly Auto Parts for only a few bucks, to press the old bushing out of the inner-tie-rod end. ...
dodge intrepid rack bushing on crossmember I have the old bushing out but there isn't anything left of it but the metal. The new ones won't fit so I think maybe there is metal sheeth still inside rack
...dodge intrepid No. Go to Napa, get the bushing repair kit. Turn the steering wheel all the way to the right. Remove the air inlet tube. Should be 2 7/8" bolts retaining the inner tie rod ends. Loosen ...
How do you replace the inner left tie rod bushings on a 98 dodge intrepid? Took it to my friend who is a mechanic - problem solved.
bushings worn out where control arms connect to rack & pinion Those are available from any parts store. Inner tie rod bushings.
...inner tie rod bushings you need to get it out. get on the engine and go to the back at the fire wall look for the bolt that hold the tie rod there should be a lock washer which is bent to keep the ...
...Inner Tie Rod Bushings. The inner tie rods are up on the firewall behind the engine, have someone turn the steering wheel back and forth (just enough to feel all the play) and see if the rods are ...
...inner tie rod ends, stabilizer bar bushings, lower control arm bushings , and finally a wheel alignment ,you have some bad looseness in one or more of these front end parts. GOOD LUCK FRIEND. 30 ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions