Questions & Answers for: dmz settings motorola modem

solution for it Assign a static IP address to the 360, then go into your router's setting and set a DMZ for that static IP

...dmz from the router's settings. Even though I had it at one time not using dmz, it was still going on xbox live. Maybe you need to update the firmware in your router. I know mine has the most up to ...

dmz host: 192.168.2.10 (ip address of the ps3, which enables "opens" all of the ports for this ip address) apart from that if you use any proxy servers to connect to the net, you have to specify these

...DMZ Search the internet for firewall settings with Xbox for step by step. The following may be a good primer: ...

...settings. You can also temporarily select DHCP to use the 'Release' and 'Renew' buttons here which is the same as the ipconfig commands you did at the Command Prompt in step 2 but reselect PPPoE ...

...DMZ and call the cable company. The cable company says call the router. I feel like its a big *********** cause each company is trying to put the blame on someone else and not getting this problem ...

...Motorola 2210-02-1002). I have setup portforwarding on 3074, 88, and 53. I have tried allowing DMZ on the static ip assigned to the Xbox (10.0.0.8) as well as just letting Upnp alone handle it. I ...

...settings you need to find the "DMZ" page. Have a look through the menus -- it's probably under "Security", "NAT", "Gaming and Applications" or something like that. You will know you've found it when ...

Motorola Surfboard cable modem. I have tried 2 versions of the Integrated Remote Station software, set both up according to instructions but nothing. WHAT AM I MISSING? This thing SHOULD work. I'm not

...settings, but it seems its set to 1492 now)Help! I posted a solution under a different problem, but similar. Basically you will need to pick a static IP for your xbox. Then set that IP address in the ...