Questions & Answers for: Sanyo dlp tv half of the screen is black

...TV video picture appears in the top half and the top of the video picture appears in the bottom half. If I click the menu button half (bottom half)of the menu appears in the upper left corner (approx ...

TV and then the bottom half went black while the top half was playing, then the top half went black too. Turning the TV off and then on did not solve it. Unplugging everything then plugging it back in

...TV full screen or maybe with a half-inch left on the bottom. What is happening and is there a way (ie setting to change) to fix this? I have the exact same problem on my Sony KV-35XBR48 but I notice ...

...of of capacitor try,Call a repair technician to do the repair or troubleshooting..Thanks.. i have a 55 inch Sanyo tv the tv plays only half of the screen the other side is black what could be ...

...half of the side of tv the side when your facing the tv ? the tv on the side when you firist turn it on has a black shallow half why across. after it warms up good it goes away .sometimes it has ...

TV on I had only the top half of a screen,the botton half is black,what can I do to fix this problem? If the problem is same with different input devices and you have ensured the are no loose contacts

My sanyo 48inch hdmi flat screen tv top half is not workin an bottom half is workin just fine Replace the T-con board. get parts here: TV Parts Universal TV Stands DLP Chips ShopJimmy

...Check out some of my other posts if you need more tips and info." Fix Your TV Instantly Samsung HL R6178W DLP TV half of screen goes black Sanyo TV Troubleshooting 5 Tips Troubleshooting an HDTV ...

...has two flat ribbon cables. Make sure they are both seated completely at both ends. If all looks well then replace the board. You can get parts here: TV Parts Universal TV Stands DLP Chips ...

...TV Stands DLP Chips ShopJimmy You can get parts here. I don't agree Lawrence..There is a service flyer on this model set for backlight failure as they are running 3.8 volts on a 3.3 volt LED and they ...