Questions & Answers for: dlp chip

Ad

Question about DLP HL-P4663W 46" Rear Projection HDTV-Ready Television

2 Answers

...DLP chip are slowly sticking either fully open (white) or fully closed (black). The part that contains the DLP chip is the Light Engine. It is the most expensive part of the TV.Only the Samsung TVs ...

Ad

Question about DLP HL-P4663W 46" Rear Projection HDTV-Ready Television

1 Answer

DLP chip when it was under warranty. Slowly, the issue came back. Is there an known issue with the DLP chip? If I replace it, how do I know it won't happen again? How hard is it to replace a DLP chip?

Ad

Question about WD-65C9 65" DLP HDTV

2 Answers

DLP chip at cost between $160-$300 for the part and about two hours of your own time to do it.http://www.shopjimmy.com/samsung-mitsubishi-toshiba-4719-001997-dlp-chip.htm/ White dot for Mitsubishi DLP

Question about WD-65C9 65" DLP HDTV

2 Answers

...DLP chip being worn out. You can replace it very easily by buying a new DLP chip for just under $190 and installing the new chip. There is a very good forum over at fixyourDLP that offers tutorials ...

...Dlp/Dmd chip with DLP projector Dlp/Dmd chip ? LCD projector have only LCD panels in the Projector DLP projector have only DMD chips in the projector there is no DMD chips in the LCD projector there ...

...DLP/DMD chip of Mitshubishi ex-320. Can i replace this (ex320 dmd chip) to the xd-280u prejector??? I have a Mitshubishi xd280u DLP projector which have white dots problem, i got a DLP/DMD chip of ...

Question about WD-60735 Projection Television

1 Answer

dlp chip replacement I need to replace the dlp chip because of the white do issue. I have a dlp chip with numbers on it 1910-6003 will this dlp chip fit and work in my tv 1910-6003 Does not look like ...

Question about WD-60735 Projection Television

1 Answer

...DLP chip, but now I have vertical lines about 1/2" apart from left to right on the screen. Did I miss a a step during the reinstall of the DLP chip or is it possible to have received a bad chip? you ...

Question about WD65737 65" DLP TV

1 Answer

...DLP chip. The BGA connection which connects the DLP chip to the board, or the flex connector may be bad, causing the row and column section to not activate the micro-mirrors on the DLP chip. Not an ...

...DLP chip, then your problem could be that the DLP chip did not get seated properly or the cam screws were not tightened enough after replacing the chip. The DLP chip must be seated properly in its ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76416 Answers

Cindy Wells

Level 3 Expert

6164 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you a Televison & Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...