Questions & Answers for: Geo Metro dizzy head

i have a 1990 geo prizim and it has water in the oil i have this 1990 geo prizim and it has water in the oil i think the head gasket went and i just want to make sure thanks it can be the head gasket ...

Oil coming from head gasket left side of piston # 1 I replaced head gasket and it steal leaks in the same spot. why wouldn't a new head gasket fix this problem? 1994 metro geo You replaced the gasket,

What is the cylinder head torque specs? The torque for the cylinder head bolts is 54 Ft Lbs. or 73 Nm Note: they should be torqued in three steps (i.e. 20 Ft Lbs, 40 Ft Lbs, then the final 54 Ft Lbs) ...

i need torque for bolts in engine head 1.0L 3 cylinder cylinder head bolts 54 ft lbs. 1.3L 4 cylinder cylinder head bolts 54 ft lbs.

...the head on my geo metro now it wont start Changed the head on my geo metro now it wont starthat is easy you timed the cam wrong or just the dizzy. the former , changes the latter, so cam is

...bingo. death. if its a hall sensor used on most after 1991 in USA, then its bad bearings on the dizzy, not posting photos so the reader can see ACTUAL. damage unlimited only eyes on can tell what ...

...head lights dim or die? bingo! no. 2: can you save the stall with a fast right foot? a: easy (isc stuck closed?) b: tad hard. (EGR main stuck open or or low fuel pressure) c: impossible. (lost spark ...

...posted. which engine, the 3 or 4cyl. bad timing belt. signs. no power no start cam dont spin rotor (dizzy) dont spin or the belt slipped (all do after 60kmiles) if spark timing is way off, cranking? ...

I have a 1995 geo metro that made a pop and quit running. I had water coming out of the overflow and it was not running hot. I took radiator cap off and tried to crank it but water was shoot out. Is ...

what is the sequence for torquing the head When you tighten an engine head you start from the middle then work to each end in a criscross fashion to the specified torque .This is to bed the head down ...