Questions & Answers for: diverter stem

...diverter valve. The threaded end of the stem shoud be outside of the spout (from the top side). 3) A round black washer fits over the threads. It should sit right where the threads end. Dont push it ...

...diverter stem stuck on shower Single lever kohler bath/shower faucet with stem style diverter to call for shower or bath. Stem in stuck in shower position. How do you free stem up so diverter works ...

diverter stem on tub spout broke and need to have instructions for how to replace the ROD Diverter seal o ring in the spout. you must replace the whole stem.you can get it at homedepot. first take the

Kohler purist shower and tub diverter valve has water coming out both the the shower and the spout. What might be wrong? washer on back of diverter stem needs replacing

I have a older Delta shower head/tub combination with scald protection. It leaks from the tub diverter. Where should I start? I'm assuming that you have a three handle faucet. You need to remove the ...

...stem on the faucet I pull up to divert the water to the showerhead does not divert the water. It continues to come out the faucet. What would cause this, and can it be fixed? Yes, it can be fixed. ...

diverter stem. It is the center knob that turns on the shower. If it is american standard, they were noted for this. You may want to shut off water to the shower itself at the shutoffs but USUALLY not

Price Pfister Tub/Shower Diverter and Hot/Cold Stems question My tub/shower uses a Tub/Shower compression Diverter part #: S10-385. I now need to buy the hot and cold stems. So, which is the correct ...

...diverter stem and seat. When I turn the diverter handle to shower, water still comes out of the faucet. When I turn the diverter to faucet, no water comes out of the shower, ?? reassembled the ...

Replaced a gerber diverted stem. Water pours out of it. I also replaced the stem valves for the hit and cold. There should have been a friction ring made of either nylon or fiber that goes on the ...